Re: Need to get this engine running,and I am stuck!!

Posted by El Toro on August 11, 2007 at 11:20:34 from (64.12.116.73):

In Reply to: Need to get this engine running,and I am stuck!! posted by chadd on August 11, 2007 at 10:51:59:

Hold your hand over the throat of the carburetor and see if there's good suction on your hand. I would double check that intake manifold to make sure it isn't leaking. Check your valve clearance
again and when checking them cold, add .002" to the clearance. You may want to do a compression check and compare the readings. They should be close to one another. We always did these with the throttle in the wide open position. Good compression and intake manifold vacuum are all related to one another. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]