Re: Super M 12volt conversion

Posted by lee m. cramsey on July 24, 2007 at 22:25:49 from (204.155.56.3):

In Reply to: Super M 12volt conversion posted by Debi Scofield on July 24, 2007 at 13:39:04:

I converted my 400 recently using an alternator from a chevy caprice.(mid to late 80's). The bracket that holds the alternator on the motor of the car is perfect to use on the 400. There is a 3/8 tapped hole in the front of the radiator spout on top. No drilling, tapping or modifying. looks good too. I used the original u-shaped bracket for the lower hole on the alternator, same belt.You can probably pick one up at a local salvage yard. I also swithced to a 12 volt coil no resistor required. My 2 cents. Lee

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]