how to get the imput shaft out?

Posted by LinemanFarmer on July 03, 2007 at 15:40:11 from (70.130.58.49):

I've been out slaveing on pulling that clutch input shaft out of the M. I took the bolts out of the u-joint and everything else is loose, I lack about 1/2" I assumed, so I tried taking the half of the u-joint off the transmission, well the shaft come with it about a 1/4" and just couldn't hold it in, and I couldn't get that off due to I was hitting the shaft end. So I looking in the I&T manual agian and cominsed to taking bolts loose on the clutch cover, I'm afraid something is gonna fly to pieces if I keep that up. Im just lacking possibly 1/4" or less, just can't get it. Do I start horseing it around or what else can I do, or just keep going on the clutch?

Thanks, DEREK

Replies:

• Re: how to get the imput shaft out? Haas 06:28:03 07/04/07 (0)
• Re: how to get the imput shaft out? Bob Kerr 17:30:40 07/03/07 (2)
  • Re: how to get the imput shaft out? LinemanFarmer 19:54:33 07/03/07 (0)
  • Re: how to get the imput shaft out? Bob Kerr 17:46:21 07/03/07 (0)
• Re: how to get the imput shaft out? BF8690 16:10:16 07/03/07 (4)
  • Re: how to get the imput shaft out? LinemanFarmer 19:56:53 07/03/07 (0)
  • Re: how to get the imput shaft out? LinemanFarmer 16:15:45 07/03/07 (2)
    • I just read your other post again BF8690 16:37:50 07/03/07 (0)
    • Re: how to get the imput shaft out? BF8690 16:32:08 07/03/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]