Re: H rim making noise.

Posted by K.B.-826 on June 25, 2007 at 22:15:18 from (68.115.93.221):

In Reply to: H rim making noise. posted by jonnny2006 on June 25, 2007 at 16:46:32:

Make sure that the bead on the inside of the rim is not damaged and that the clamps are not worn. Also got to make sure you tighten them evenly. If not, the rim may get crooked on the wheel. To check, jack it up so the tire is off the ground. Place a stationary object about a 1/4" of an inch away from the side of the tire. Rotate the tire, and watch to see how it moves in relation to your stationary object. Tighten and loosen and retighten the clamps until your rim is as true to the wheel as possible. It can be a fustraiting process, but worth it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]