Re: super c stuck in gear.

Posted by Roger Mills on February 15, 2007 at 17:33:25 from (71.213.68.215):

In Reply to: super c stuck in gear. posted by james jennings on February 15, 2007 at 09:28:35:

Had similar problem with an IAA. Someone else had tried to fix but got the shift fork in wrong. I took the top off the tranny and visually slid the gears until they were in neutral. I put the fork slides in the neutral detent and put the cover back on. Had to do it twice to get the forks into the slots correctly without binding the gears. Problem was the same as the prior post and this one. The end of the gear shift wears out and jumps out of the slide leaving that one in gear. I found a used gear shifter that was OK and dropped that in. Works perfectly now.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]