Re: model # and help with Gm one wire conversion

Posted by Bob on February 06, 2007 at 15:41:49 from (69.178.229.154):

In Reply to: Re: model # and help with Gm one wire conversion posted by big red fred on February 06, 2007 at 11:07:01:

AFAIK, the one-wire Delco's used on semi's are a larger frame, brushless unit, with a HEAVY iron field core that retains residual magnetism for easy exciting upon startup.

I don't know WHAT you think I had trouble figuring out! I repair alternators for a living, and have been doing these conversions since the 10SI's were only on the market a year or two.

What I HAVE figured out is that the (goofy) "one-wire" units are often a pain in the butt when used on low-revving antique tractors. From all the posts on here about them, it looks like I'm not the only one seeing those problems.

Replies:

• Re: model # and help with Gm one wire conversion big red fred 19:37:06 02/06/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]