Re: hyd part needed for H

Posted by Tom in Iowa on January 12, 2007 at 08:54:04 from (65.172.9.223):

In Reply to: Re: hyd part needed for H posted by RustyFarmall on January 12, 2007 at 08:06:32:

I have had the pump out. The manifold is a separate piece that bolts on towards the top of the pump, is held on with 3(I think--maybe 4) 3/8 inch bolts. One bolt bolts on from the outside, and the others bolt on from the inside. Two half-inch pipes screw on going out to the left side of the tractor, one pipe screws in on the other side. Mine had bad pipe threads that we have tried to fix, and a crack in the casting as well. The pump otherwise builds up pressure just fine, but this manifold--unavailable from IH, is my problem. Central Iowa just N of Ames.

Replies:

• Re: hyd part needed for H RustyFarmall 09:01:55 01/12/07 (2)
  • Re: hyd part needed for H Tom in Iowa 10:29:59 01/12/07 (1)
    • Re: hyd part needed for H RustyFarmall 10:50:31 01/12/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]