Re: PTO jumps out of gear

Posted by Hugh MacKay on December 13, 2006 at 15:03:03 from (209.226.247.131):

In Reply to: PTO jumps out of gear posted by TKN on December 13, 2006 at 13:07:02:

TKN: I expect your B is much the same as later models and has a detent ball type end on a small plunger to hold the engage lever engaged or disengaged. On the inner end of shaft from engage lever is a flat plate with two positions for ball end to seat in. One is engaged position and the other disengaged. Just behind the lever shaft is a plug, behind that plug is a spring, and the plunger with ball end.

I had some trouble with one of those this fall. PTO hadn't been used in awhile and the spring and plunger were gummed up with sludge and rust.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]