Re: Farmall C Owners; I Have A Question.........

Posted by Nat on November 02, 2006 at 19:07:30 from (209.102.251.14):

In Reply to: Re: Farmall C Owners; I Have A Question......... posted by Dave_Id on November 02, 2006 at 15:44:37:

Cap, I made the 3PH for mine, all together it cost less than 200.00 while the aftermarket kits were 700.00. It works great, wouldn't hesitate to start on a 100 acre field with it plowing/disc. ect. Here is a pic. I have more if needed. In this pic I used the touch control, but didn't like it so used a 3x8 cyl for the update. The touch control had enough power, but was to fast to do any fine work. with the cyl now it works much better. Later, Nat

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]