Re: Farmall 300 Clutch Adjustment

Posted by D Slater on October 29, 2006 at 07:41:26 from (64.12.116.65):

In Reply to: Re: Farmall 300 Clutch Adjustment posted by John's 300 on October 29, 2006 at 05:43:01:

Your T/A clutch is not releasing, double check your adjustments and if you still have problem shorten the link between main clutch shaft and T/A clutch shaft 1/2 turn at a time until the problem goes away. If that takes care of it when finished Put T/A handel forward pull the pin in short link. Then looking at tractor from left side turn T/A clutch shaft one to rear of tractor counter clockwise until you fell release bearing contact pressure plate fingers then turn shaft back until pin will line back up. This is to make sure release bearing is not running agianst fingers all the time. If theres no free travel left after shorting that link or it still won't come out of gear the T/A clutch itself may have a problem.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]