Re: To buy a M or an H?

Posted by chadd on October 06, 2006 at 06:28:09 from (155.92.31.51):

In Reply to: Re: To buy a M or an H? posted by Dakotaclassiccycle on October 05, 2006 at 20:28:15:

H and M should be in different classes, at least I hope so for the H operator's sake. The H is pretty close in size, but it is nowhere near the power of an M. I doubt the H (assuming it is stock) would even make it to the 100 foot mark pulling a load an M would pull. However, if the H was weighted properly and the M wasn't it would be another story. It is pretty hard to call a tractor pull, many things factor in. All things being equal, the M would walk over the H.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]