Re: need some info on an M head

Posted by MJF on September 20, 2006 at 12:45:49 from (69.72.80.73):

In Reply to: need some info on an M head posted by Jak on September 20, 2006 at 08:34:43:

So chad is there any difference at all between the 8060 and 8574. I have an 8574(also off an lp)that I wanna use. I wanna bore my block for 450 Firecrater pistons and sleeves and have my cam ground. I have a 450 carb. How will that work for me and what could I do better. Thanks Mike

Replies:

• Re: need some info on an M head ChadS 14:00:30 09/20/06 (0)
• Re: need some info on an M head Jak 12:53:43 09/20/06 (1)
  • Re: need some info on an M head ChadS 13:35:00 09/20/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]