Re: 656 front tread width (again)

Posted by K.B.-826 on August 14, 2006 at 16:16:02 from (68.115.99.190):

In Reply to: 656 front tread width (again) posted by Don656 on August 14, 2006 at 15:45:27:

Are you measuring from the center of one tire to the center of the other tire? That"s the correct way to do it. It really doesn"t matter if you measure at the top or bottom or front or back, as you will only see about a 1/4" difference depending on where you measure. Also, you may have some non-original wheels. I think the IH ones had a little different offset. I know I"ve run into a couple wheels/tires off of wagons and such that I"ve tryed to use as spares on IH tractors, and they ended up rubbing the spindle.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]