Re: I BOUGHT THAT '46 H! WOO HOO!!!

Posted by old on August 06, 2006 at 10:05:57 from (4.244.57.123):

In Reply to: Re: I BOUGHT THAT '46 H! WOO HOO!!! posted by Mike CA on August 06, 2006 at 09:38:38:

Well I have 2 welders, that un its self was about $2500-3000. Then a torch set that is about $1000 by the time you get the tanks. The things like pipe benders, shop press chop saw and a few other things and that gets it up to around $5000. And thens theres the hand tools. I have wrenches from les then 1/4 inch up to 3 inches and in most of those I have 3 or 4 of each. It doesn't take long to add up and I have had a couple sets taken by way of 5 finger discount which hurt real bad. Twice now I have had to start from zero and get tools becuase some one wahted them and just took them. Of course I'm not saying you will need all the tools I have but you can figure on a few hundred to get you going and then maybe more depending on how big you go etc

• Hobby farm

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]