Re: Initial Carb Settings - Super C

Posted by SuperCDon on June 29, 2006 at 05:21:55 from (207.40.151.166):

In Reply to: Re: Initial Carb Settings - Super C posted by City-Boy McCoy on June 29, 2006 at 03:43:13:

Thanks much for the reply. I tried squirting gas into the cylinders. No luck. My engine was rebuilt a couple of years before I bought the tractor and started restoration. It was running until the day I decided to start disassembly...about a year ago. It's been sitting ever since. Based on CNKS reply, I will make sure the jet settings are about right. I have been reluctant to open up the Zenith carb since Denny's is such a pain to deal with...I paid $175 to have the carb rebuilt..thought they were a good place because of their RP mag ads..but if I do anything to it..even though it had the choke actuator shaft on bass-ackwards...they want to charge me shop time and labor to make it right. Guess I will just bite the bullet and check the float setting myself. I held my hand over the air inlet..had great suction. Since the timing seems right, about the only thing it could be is the carb.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]