Slow speed sprocket for IH 510 drill

Posted by VIN/VA on June 13, 2006 at 10:02:50 from (207.69.137.206):

I want to plant milo with my 510 end wheel drill. At the lowest setting, and with every other hole blocked, the population is still about twice what I need. The sticker inside the grain box says that a slow speed drive sprocket (14 tooth) is available, but my local dealer does not have the number on his computerized parts manual, and says he does not have a paper manual. Could someone give me the part number or source for a used sprocket?

Replies:

• Re: Slow speed sprocket for IH 510 drill El Toro 17:25:59 06/13/06 (2)
  • Re: Slow speed sprocket for IH 510 drill Super A 10:39:42 06/14/06 (1)
    • Re: Slow speed sprocket for IH 510 drill El Toro 14:16:39 06/14/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]