Re: TA troubles on 966 and 1086

Posted by the tractor vet on June 13, 2006 at 05:25:36 from (64.179.117.86):

In Reply to: TA troubles on 966 and 1086 posted by Hossw on June 12, 2006 at 20:14:47:

Need more info , as like about how many ponys you are putting out ??? 250 lbs lock up pressure is fine for a regular farm tractor even if your running a littel over 250 hp. But now if you are running a charger and a turned up pump and pushen over the 250 mark then well it may have sliped you can add a pressure reg. springs from a 15 and bump the lock up pressure up to around 285-300 . But if you are maken some real good power out of it then the T /A will not hold and it is time for the big input shaft and NO T/A along with the lower countershaft support . As far as the 1086 i am not sure as to the problem there as i can not do some checking myself .

Replies:

• Re: TA troubles on 966 and 1086 hossw 15:24:21 06/13/06 (6)
  • Re: TA troubles on 966 and 1086 hossw 19:55:36 06/13/06 (4)
    • Re: TA troubles on 966 and 1086 the tractor vet 06:57:08 06/14/06 (2)
      • Re: TA troubles on 966 and 1086 Hossw 15:35:36 06/14/06 (1)
        • Re: TA troubles on 966 and 1086 the tractor vet 17:01:29 06/14/06 (0)
    • Re: TA troubles on 966 and 1086 the tractor vet 06:50:23 06/14/06 (0)
  • Re: TA troubles on 966 and 1086 thetractor vet 15:51:04 06/13/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]