Re: model h

Posted by RustyFarmall on June 11, 2006 at 11:28:00 from (199.120.81.228):

In Reply to: model h posted by gene symons on June 11, 2006 at 10:02:53:

Obviously you are getting gas into the carb, but apparently not enough. The reasons for this happening are many. The needle valve could be partly stuck, the float may be not dropping enough, the fuel inlet screen may be plugged, the fuel line itself could be plugged, the sediment bowl probably needs cleaned, including the fine mesh screen that sits on top of the glass bowl,the inlet into the sediment bowl might be plugged, and finally, there may so much rust and crud in the tank that it won't matter what you do, everything will just plug up again.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]