Re: Farmall A tire size

Posted by CNKS on June 05, 2006 at 20:01:56 from (204.249.178.138):

In Reply to: Re: Farmall A tire size posted by Hugh MacKay on June 05, 2006 at 19:05:08:

Could be. I don't think much was standardized when the old tires were made. Be interesting to compare an original 9 with a new 9.5. When you mentioned your tractors, I went out and looked at mine with the 11.2's. It does sit lower in the front, but I would have to be pretty picky to object to it. I could probably even it out with 6 ply on the front. I do agree about the speeds though. As to the C, I have one with new 11.2's on it and one with half worn 9.5's (they have the original 9 designation). Going to measure them tomorrow, probably not a fair comparison, since the old ones are worn.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]