Re: How heavy is the top for the 350U hyd resivour

Posted by jeffcat on June 05, 2006 at 09:50:26 from (216.107.36.76):

In Reply to: How heavy is the top for the 350U hyd resivour? posted by jmauss on June 02, 2006 at 19:21:22:

Chain hoist-flat screw drivers-pinch bars- crow bars- antigravs- phassers- thugs- mugs-pugs and anything else you can think of. Lots of cuss words too. WATCH THE FINGERS! Drain all of the oil and clean the bottom of the casting too. Use fresh HI-Tran. Be careful cause it can be a real Bi----ch of a job. Take your time and you should do it. jeffcat

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]