Thanks,and dwell setting?

Posted by GordoSD on May 16, 2006 at 10:43:55 from (66.115.200.140):

Thanks to Jim N and Hayfarmer my post at 9 CDT was quickly answered and the governor problem and dwell tach were operating as prescribed by noon. Problem was the two adjusting screws (speed and idle stop) were way off the marks. Now "Emma" as in "emma going to make it " is purring like a kitten at idle ( 425 rpm)and roaring like a lion at high speed. 1600 rpm no load). Oil was good (all over the floor) and the bell crank right on the money.
Now the dwell. Can't find a spec for this anywhere. It looks like I have about 60 degrees.
Anyone got a setting and a reference book? Never did like the feeler gage method.

Gordo

Gordo

Replies:

• Re: Thanks,and dwell setting? Professor Werner Von Brau 16:34:04 05/16/06 (0)
• Re: Thanks,and dwell setting? the tractor vet 11:04:29 05/16/06 (0)
• Re: Thanks,and dwell setting? Wayne Swenson 11:01:04 05/16/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]