|
Farmall Tractors Discussion Board |
Re: 6 volt 12 volt Why change
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by The Red on January 16, 2000 at 00:35:38 from (12.75.197.50):
In Reply to: 6 volt 12 volt Why change posted by Rick on January 15, 2000 at 15:09:19:
I read all the replies first of all and all are good comments. What I do on my conversions is take the original 6 volt generator into Stans Elec. in Indianapolis and they convert it to 12 volt and mount a new Delco voltage regulator on top of the generator. It looks like the 6 volt system but I don't have to spend the extra money for a 6 volt battery. They are not cheap. Right now all my Hs are still positive ground. On the coil resistor, I mount it on the steering support post behind the engine (where the oil gauge line is bolted) so it is out of site and out of the weather. I just try to find a middle road between purist and practical.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Antique Tractor Wiring Basics - by Curtis von Fange. One of the most neglected parts of old tractors is the wiring. After sitting in the elements for half a century or more much equipment wiring has deteriorated to sparsely covered strands of copper or other metal. Plastic insulation has cracked, mice have eaten through the older clothed style coverings and the exposed wires have reacted to winter moisture and salts by turning blue and powdery. Terminal ends have corroded, rusted or just plain evaporated away. Aged wires not only keep an engin
... [Read Article]
Latest Ad:
1952John Deere MT tractor
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
