Re: Loader

Posted by Nat 2 on April 24, 2006 at 10:30:02 from (64.80.108.52):

In Reply to: Loader posted by Mr. Roper on April 24, 2006 at 08:48:17:

Keep dreaming if you think you'll be able to buy a set of brackets... Unless you're stupid-lucky and just happen across an auction where some other guy has done the exact same thing, and just happens to have his set of modified brackets for sale separate from the loader. You can rest assured that no God-fearing, red-blooded John Deere engineer ever considered putting that loader on anything other than a John Deere tractor. To do so would've cost him his job. Why make it compatible with the competition's tractors when you can get the guy to buy a new Deere to go underneath that loader?

Nope, you're going to have to get out the torch and welder, and hit the old scrap iron pile...

If it's a quick-attach loader on stands that you can drive into, you should try it on for size. See if you can even get the tractor in there.

With the original brackets on the right tractor, take all kinds of measurements as to the location of the brackets relative to the most forward part of the tractor. Pay special attention to the width. Then, do what it takes to replicate that on your IH.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]