|
Farmall & IHC Tractors Discussion Board |
Head removal--Super A
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JPM in WA on April 23, 2006 at 14:03:54 from (64.40.45.227):
I am pretty sure I have removed all the nut and bolts that keep the head attatched to the block, and yet the head will not come free. Does the seal ever hold on th head so well that it won"t even budge? I have a feeling that I missed something really obvious and I just can"t see anything. I removed the rocker arms by taking off the nuts.
The head bolts were secured with nuts that came off fairly easily. My concern here is that the bolts that the nuts were on stayed in the head. Is this normal? Or should they come out? Other than that I have been tapping on the head to try and free it up , but it seems very "stuck"...no give whatsoever. Any ideas would be greatly appreciated.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Engine Basics: Spark Plug Cleaning - by Staff. Cleaning procedures: Brush or blow dirt from around the spark plug base. Remove the plug with a correctly fitted wrench. Examine the porcelain insulator and points. If the insulator appears to be melted or blistered, cracked or broken, and the points seem unduly burned it is evident that the plug is operating too hot and it should be replaced with a colder plug. If the plug is fouled excessively with carbon it apparently is operating too cold and it should be replac
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
