Re: Head removal--Super A

Posted by gene bender on April 24, 2006 at 00:48:24 from (66.43.221.211):

In Reply to: Re: Head removal--Super A posted by JPM in WA on April 23, 2006 at 20:28:59:

There are several threaded holes to hook a chain to remove the engine. You can also hook to the headbolts that stick thru the head. I use a nylon strap going around the whole engine when pulling one and transfering to the engine stand as you will want the clutch mounted to the stand. Use a 5# deadblow hammer or a strong putty knife in the gasket as there are two pieces of metal used in the head gasket drive between them in the soft center. Sometimes the head is pretty tight.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]