|
Farmall & IHC Tractors Discussion Board |
Ok..who said plowing is easy?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Paul Shuler on April 22, 2006 at 13:44:37 from (170.29.248.3):
Plowed for the 1st time in my life yesterday. I have a lot to learn. Thanks to Huge and Bob M for giving me some very helpful tips.On my first few rows I was leaving a strip of sod and it was pulling so hard it killed the motor a few times. I figured out that my rt rear tire needed to be slid in all the way to the axel. I didn't want to take time to do this so I scooted over about 6 inchs in the furrow and man what a difference it made. Pulled much easier. And yes Allen that sod is hard to bust up. This was the best grass on my place. I was in 1st gear wide open just to keep it rolling. Tried 2nd but it just couldn't do it. I'm sure it would have turned the sod over better if I could have had a little more ground speed. But it was all the little Super C wanted. There is a low place that runs across my ground also and that gave me some problems. I would either bury the plow or come up out of the ground. Had to learn to listen for it starting to struggle and lift the fast hitch a little or drop it a little. By the time I got to the end I was loving it. Made me sad when I was done. As for disking, now I know why you guys say not to put your thumbs inside the spokes on the steering wheel. Disked right up till dark and somemore this AM. Pulled the disk with the H in 3rd adjusted to take the biggest bite. Oh man you gotta love that sound and the little blue flame out the stack right at dusk. Thanks for turning me on to this plowing stuff guys I love it. The second most fun thing I have ever done on a tractor.
Paul
If you look at the photos you can tell I have a lot to learn yet. Pulled a spike tooth harrow over it this AM and it's a smooth as butta!
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Trailering Your Tractor - by Curtis Von Fange. One of the fun things of summer and fall are the parades and tractor shows that go on across America. Many owners of tractors travel long distances to attend these shows and they usually take their restored iron along with them. Safe trailering practices and inspections will ensure that the event is a fun one. A good habit to develop when using a trailer is to give that �quick look over� before taking it on a trip. Before hooking up to it check the tongue for proper operation. The latche
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
