Re: Seized H engine

Posted by El Toro on April 05, 2006 at 16:28:44 from (152.163.100.65):

In Reply to: Seized H engine posted by L Collins on April 05, 2006 at 15:54:07:

You need to remove the sparkplugs and pour transmission fluid into each cylinder and let it soak. After a week of soaking see if the engine
can be moved. If the engine won't budge I would pull the head and oil pan. I would remove any thing flammable, gas tank. wires and then pour a
small amount of diesel or kerosene into the cylinders and then set them on fire. You need the heat to free them. Make sure the tractor is away from any building and have a big fully charged fire extinguisher with you at the site.
Remove any sheet metal over the engine too. I think I would only do one cylinder at a time. Once it is hot I would try and drive out the piston. You may want to remove the rod caps on each piston prior to heating them. Use a piece of 2X2 oak and a hammer and don't hit the crankshaft. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]