Re: installing fuel bowl assembly on a gasser

Posted by Kelly C on March 24, 2006 at 20:05:10 from (65.165.20.97):

In Reply to: installing fuel bowl assembly on a gasser posted by Tom F on March 24, 2006 at 14:46:34:

I just did that today on my 706. White tape on the threads. I purchsed a hose connector nipple from NAPA. This screws into the bowl and allows you to use standard fuel line hose.
Use tube cutter and cut out the old fuel line any where you want before the carb. Add fuel line and 2 hose clamps and you done. Easy on and off the next time. No more cracking the fittings so they leak.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]