|
Farmall & IHC Tractors Discussion Board |
H with a mag
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Sponz on February 03, 2006 at 15:09:01 from (12.166.24.30):
ok, i recently took on a project. an H farmall that had the mag removed and worked on.. when it was put back on it would produce spark.. but backfired through the intake.. that told me the timing was 180 degrees off.. then the tractor sat for 7-9 years ,,, somewhere in there.. anyways i found the timing was indeed 180 degrees off but i cant get any spark out of it.. is there anything i can check on it?? or do i just need to throw it away and put a distributor on it? what are some things i can check?? i know im getting voltage to the magneto but other then that i dont know anything about them. Im only 19 and have lots to learn. basically all i mess with is diesels and a few gassers with distributors.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Horsepower Defined - by Staff. Indicated Horsepower This represents the power developed in the enine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful hor
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|