Re: ta adjustment ...how bad is bad

Posted by the tractor vet on January 30, 2006 at 19:30:05 from (4.124.69.234):

In Reply to: ta adjustment ...how bad is bad posted by vinny on January 30, 2006 at 17:04:13:

With age and ware on the turn buckel clevis ya can't always go completly by the book . Set the free travel on the clutch as close as you can to spec. then the link that goes to the t/a clutch rod set it a bit tighter just as long as the throw out bearing is not rideing on the fingers you will be fine then ya have to adjust the t/a lever so it will release the t/a throw out bearing . Like i said it is only good on tractors with vary littel ware .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]