Re: Early 560's what was the rear end problem?

Posted by Nat 2 on January 27, 2006 at 05:11:21 from (64.80.108.53):

In Reply to: Re: Early 560's what was the rear end problem? posted by K.B.-826 on January 26, 2006 at 19:40:22:

K.B.,

We had a 560 when I was a kid. There were a couple of times in its history where it went down with rear end problems, and it was always that a bunch of bolts had been sheared off in the rear end.

As I recall, there were a total of 8, grade 8, 3/8" diameter bolts that needed to be pried out through the shifter hole on top, retrieved through the PTO if you didn't catch them, and replaced. Again, as I recall, Dad said that that was the rear end problem, and the fix was to have the holes machined out to accept 7/16" bolts.

Anybody heard of this?

Replies:

• Re: Early 560's what was the rear end problem? Hugh MacKay 05:45:14 01/27/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]