Farmall & IHC Tractors Discussion Board |
Re: She is NOT getting the better of me today.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on January 16, 2006 at 15:40:56 from (4.124.76.207):
In Reply to: Re: She is NOT getting the better of me today. posted by Kelly C on January 16, 2006 at 15:25:18:
yep your going to have three loose ones and three that fit correctly That is why i was suggesten that you go to the 291 update and have it bored then if done correctly everything fits like a glove now If you would have gone to the case I H dealer they use to be able to get the sleeve and piston kit for the C and D bore class. as the sleeve is a bit thicker . now I know someone is going to tell you like they fed me the same line that a hand fit was good well way back when i did one hole that it was a hand fit on one of my owen 706 with a 263 and about a year after i had done it it sucked that sleeve and thrashed and crashed around a bit but it did not blow sooooooo i pulled the head had a buddy bring his porable boring bar over bored the hole pressed in a repair sleeve and bored it to the A spec. and pressed in the new sleeve never did that again.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|