Re: M Farmall Rear End stuck

Posted by captaink on January 13, 2006 at 11:22:53 from (66.115.214.56):

In Reply to: Re: M Farmall Rear End stuck posted by jndrgreen on January 13, 2006 at 10:13:38:

If you have the factory brakes (not the disc brakes) the M has a shaft that goes through the brake cover on the top front of the cover. On the one that the wheel won�t turn, check how much (if any) this shaft rotates when the corresponding brake pedal is pushed in. If this shaft doesn�t turn, but the spring takes up the movement, then the shaft is probably rusted tight in the cover preventing the brake from releasing. You could try putting oil on it and tapping it with a hammer in the opposite direction the pedal would move it to try to free up the brake.

Good Luck!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]