Re: 826D Block Heater

Posted by MN Scott on December 05, 2005 at 19:20:03 from (206.9.216.96):

In Reply to: 826D Block Heater posted by KMR on December 05, 2005 at 11:02:08:

There are no frost plugs on the german's made before the late 70's or so. There are two way's to go, the lower radiator hose heater that in my opinion does not do a good job of warming a diesel block or the tank type heater. For the tank heater you run a hose from the block drain on the left side of the engine block to the tank heater and from the heater to the water pump carrier plug on the left side. The heater will circulate warm water thru the block, works great. Just be sure to get a 1500 watt heater.

Replies:

• Re: 826D Block Heater KevR 07:17:39 12/06/05 (1)
  • Re: 826D Block Heater MN Scott 08:09:57 12/06/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]