Thanks- Slappy,Old,CNKSHendrik

Posted by Black Smoke on October 27, 2005 at 14:11:32 from (65.127.72.207):

Finally got the contrary head off the 43H using a little of all Your advice. The first thing I noticed is all four pistons are smaller than the sleeves. The sleeves measure 3 3/8. The pistons as good as I can measure are 3 1/4", and are step faced. The sleeves don't seem worn much, but there is a lot of black soot or carbon build up on top of all pistons. I just got the tractor this summer and shredded a little with it and it pulled and turned a 6ft shredder, but I can't understand how it ran at all. Guess I need more advice about what to do next. It seems to me undersized pistons were installed. Is that O.K. or do I need to replace them?

Follow Ups:

• Re: Thanks- Slappy,Old,CNKSHendrik El Toro 07:52:34 10/28/05 (0)
• Re: Thanks- Slappy,Old,CNKSHendrik gene bender 03:40:01 10/28/05 (0)
• Re: Thanks- Slappy,Old,CNKSHendrik old 16:31:46 10/27/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]