Re: '54 Farmall Super C Clutch doesn't work

Posted by Been There on October 18, 2005 at 17:43:17 from (24.250.112.64):

In Reply to: Re: '54 Farmall Super C Clutch doesn't work posted by old on October 18, 2005 at 09:39:22:

I have a 200, which is about the same thing. On mine, I could start it in neutral, but it would grind when I tried to shift. I tried all of the above stuff, then had it picked up. Turned out that one of the bolts inside the clutch had backed out a bit. After that was fixed, it would sometimes stick anyway. What I do now is to park it, chock all the wheels, lower the bush hog, and put a 2X4 between the clutch pedal and the footrest to keep the clutch plates from sticking during periods of non-use. That has helped a lot. You can also get it rolling down a hill, push in the clutch pedal, then stomp on the brake a few times to free it up. You need to plan ahead on that one :-) It can be a crazy ride. Good luck

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]