Re: Got the head off and now....

Posted by El Toro on October 04, 2005 at 09:47:47 from (64.12.117.13):

In Reply to: Got the head off and now.... posted by Andrew Z on October 04, 2005 at 07:20:43:

Any problem getting the head off? If that head is rusted through I think I would look for a good used head that's been magna-fluxed or is guaranteed not to be cracked. Sleeve and piston
kits are available from ytmag. If not try jebm@threeriver.net. You should measure that
crankshaft or have it measured by your local auto
machine shop. It may need to be polished or ground undersize and cleaned good too. That should include the block too. Hal

Follow Ups:

• Re: Got the head off and now.... Andrew Z 13:36:39 10/04/05 (1)
  • Re: Got the head off and now.... El Toro 14:47:11 10/04/05 (0)
• Re: Got the head off and now.... Andrew Z 13:35:09 10/04/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]