Body filler prep on my H's Auxilliary Fuel Tank??

Posted by Tanner Clark on September 27, 2005 at 11:31:01 from (206.239.4.3):

Folks,

I have been preping and priming a lot of my pieces to the tractor recently. When I stripped my auxilliary fuel tank down to bare metal, I noticed there were a number of little pin holes in it. I have not intention of running fuel through this once the project is complete, but I need to patch these holes up for the paint job. What brands or materials do you reccomend I use to do this, bondo, etc. I assume I shoudln't use JB weld, b/c I need to sand and prep the area again for primer and paint. Any hints?

Thanks.

Follow Ups:

• Re: Body filler prep on my H's Auxilliary Fuel Tan CNKS 18:10:51 09/27/05 (0)
• Re: Body filler prep on my H's Auxilliary Fuel Tan El Toro 14:17:45 09/27/05 (0)
• Re: Body filler prep on my H's Auxilliary Fuel Tan RustyFarmall 13:14:17 09/27/05 (0)
• Re: Body filler prep on my H's Auxilliary Fuel Tan Red Dave 11:42:35 09/27/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]