Re: Super H Problem

Posted by El Toro on September 24, 2005 at 07:43:25 from (64.12.117.13):

In Reply to: Super H Problem posted by HFarmall on September 24, 2005 at 07:13:31:

I would check that cap where the rotor contacts
No3 for any burnt contacts. If you have another cap I would install it to see if that fixes the problem. Be sure to swap the the plug wires in their correct firing order. Are you sure that
No3 plug wire isn't firing when you hold it away from the plug? I thought the valves may be too tight on No3. Set them at .020" cold. Hal

Follow Ups:

• Re: Super H Problem Janicholson 13:47:06 09/24/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]