Installing rear wheel weights

Posted by jessboyd on September 20, 2005 at 18:58:55 from (24.119.66.94):

I have a 504 and I recently bought some rear wheel weights. I was planning on putting two sets (4 weights total) on each side. The weights are kind of curved on one side and kind of flat on the other side. The wheel as it is installed on the tractor is concave outward. How are the weights bolted on the wheel? Is the first (inside) weight curved side in or flat side inward? Is the second (outside) weight curved side on or flat side inward? It looks like the inside weight can be bolted to the outside weight. Is it? Are the bolts anything special, like high strength grade 8? Is there anything else I need to know. Thanks in advance.

Follow Ups:

• Re: Installing rear wheel weights FarmerSid 04:47:46 09/21/05 (4)
  • Re: Installing rear wheel weights jessboyd 06:24:51 09/21/05 (0)
  • Re: Installing rear wheel weights Dick Davis 05:22:52 09/21/05 (2)
    • Re: Installing rear wheel weights jessboyd 06:21:56 09/21/05 (1)
      • Re: Installing rear wheel weights Dr.EVIL 07:47:02 09/21/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]