Re: Lift-All correct operation

Posted by CNKS on August 02, 2005 at 19:49:56 from (204.249.178.138):

In Reply to: Lift-All correct operation posted by haymeadow52 on August 02, 2005 at 19:37:00:

When the stop is against the bracket, it is neutral. When you begin to pull it back, it should begin to raise, when pushed below the bracket, gravity causes it to drop. Either lifting or lowering should stop when returned to the neutral position. Whether you can actually stop the lowering, depends on the weight of your implement. I have never adjusted one. I prefer to release the lever manually, to prevent it banging against the stop, knowing that if I hold it back too long, excess pressure may build up. It can get hung up in the up position also, which may not be good.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]