Re: IH560 C263 Dang the luck

Posted by migraine on July 09, 2005 at 20:28:21 from (24.22.154.216):

In Reply to: IH560 C263 Dang the luck posted by Heat Houser on July 09, 2005 at 17:34:30:

The 560 diesel 282 motor has the same setup and my machine shop screwed up the placement of the #2 bushing as well. rather than take it all back apart, we installed a T at the oil pressure port and ran a 1/8 copper line from there in through the valve cover into the bushing and works beter than new. I wanted lots of oil there since I'm turning the motor pretty hard.. Just silicone around the entrance hole and dont worry about it. migraine

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]