Re: 300 ute clutch won't disengage

Posted by SRC on June 22, 2005 at 06:45:30 from (158.136.78.65):

In Reply to: 300 ute clutch won't disengage posted by Yooper on June 19, 2005 at 20:33:12:

I had the same problem with my 300 Utility many
years ago. What I did was to push the clutch pedal
down, hook it to the running board with a heavy
piece of wire, then squirt Marvel Mystery Oil
up in around the throw-out bearing and shaft (not
on the clutch itself). I left it that way all one
winter. The following spring, I unhooked the wire
and the clutch has worked great ever since. I had
tried everything to free it beforehand, and nothing else would come close to working.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]