Re: IH 350 Hydraulics....continued.....

Posted by Evan350 on June 02, 2005 at 07:02:42 from (129.42.208.182):

In Reply to: Re: IH 350 Hydraulics....continued..... posted by twopop on June 01, 2005 at 19:41:07:

I agree with twopop--check for air lock. However, be careful loosening the nut when the tractor is running. If the pump should be pumping, the oil may shoot out at high pressure. (If all the handles are centered there shouldn't be much pressure, but I'd still wear gloves and goggles just to be safer.) By the way, is your 350 a Farmall or Utility? The breather location I mentioned previously is for the Farmall. I'm not familiar with the Ute, but I think its under the seat. Also, I don't have power steering, so I don't know how its plumbed or where the splitter is.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]