Re: 560 2 point lift height

Posted by Joe Evans on June 01, 2005 at 07:23:07 from (67.129.216.96):

In Reply to: 560 2 point lift height posted by Lance R. on May 31, 2005 at 20:28:13:

I'm not absolutely certain of this, but...

Isn't there an adjuster that lifts and lowers the entire fast hitch assembly and is mostly used for leveling the entire "plane" of the fast hitch for plowing depths? Wouldn't this allow for a higher starting point for lift clearance?

This adjuster would look like a flat bar with notches and would have a hand hold loop welded to its top. Located near the axle and on the left side of the fast hitch assembly.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]