MD engine/Galion grader

Posted by Joseph Johnson on May 29, 2005 at 17:29:06 from (66.202.65.144):

Thanks to you guys for the info. I should say that all that matters is the bolt pattern for the bell housing. The front mount will change over. Leaving the rear. As long as the bolt pattern is the same I can use the MD engine. The engine sits on the front/rear mounts clear of everything else. From what I have come up with it is an H engine in the grader. Don't get me wrong I could unbolt both bell housings and take measurements to know for sure. Or you guys may just know. Thanks again.

Follow Ups:

• Re: MD engine/Galion grader CNKS 06:34:04 05/30/05 (0)
• Re: MD engine/Galion grader old 19:31:55 05/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]