Re: 1964 706 gas ci?

Posted by MN Scott on May 23, 2005 at 18:12:20 from (206.9.216.38):

In Reply to: 1964 706 gas ci? posted by Mark R. NY on May 23, 2005 at 15:58:49:

The engine's size should be stamped on the left side of the block near the oil filter. RAS is right that a 64 is supposed to have a 263 in it. If you work them hard they burn alot of gas. Also make sure you use 93 or higher octane gas or you will be melting pistons and burning valves if you work it hard. A gasser is ok for light work but heavy tillage should be left for a diesel tractor IMO. Also it would be a good idea to buy a owners manual and service manual, they come in handy at times.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]