Re: Warped Head on cub

Posted by El Toro on May 05, 2005 at 03:55:35 from (64.12.117.13):

In Reply to: Warped Head on cub posted by GNB on May 04, 2005 at 19:24:21:

You should check with your local machine shop for machining costs. The block may need to be bored
oversize for new pistons, valve job, crankshaft
may need to be ground undersize or polished.

One of the Cub owners that post on here said it cost $900.00 to put his engine in first class shape. I did a GM engine with a 4 cylinder engine and a broken ring scored the cylinder and
it cost me $600.00 for parts and machining and I assembled the engine and then they found the head cracked which was another $500.00 since I had to buy a new head. I found 6 used heads and they were cracked too. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]