Re: Tire width for farming discussion on Farmall 1

Posted by Hugh MacKay on April 19, 2005 at 16:31:34 from (64.228.11.179):

In Reply to: Tire width for farming discussion on Farmall 100 posted by Ramon from NC on April 19, 2005 at 08:49:36:

Ramon: First off your tractor must be already set wider on one side than the other. They move in 4" inkrements 44", 48", 52", etc. 46" indicates to me one rim must be on inside of wheel center and other on the outside.

To change wheel tread, you place rim inside or outside wheel center , then you can turn rim other way as lugs are offset. Then you change wheel centers from dish in to dish out and repeat rim settings. Each one of these setting changes each wheel 2".

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]