H Trans. Driving Shaft fix?

Posted by Chris in Fredericton on April 17, 2005 at 17:57:23 from (69.195.193.243):

I have my "H" transmission cover off and have a few problems I need to fix up. I noticed there is quite a bit of play in the trans. driving shaft when I grab the gear and wiggle it. After finding worn bolts and rubber spacers in the drive shaft coupler, was wondering if that alone could cause that much wobble. Has anyone fixed up the coupler and found it tightened up the movement in the shaft?? I had no previous noise to indicate problems with the trans. main shaft pilot bearing, but if it was worn could it cause this much play?? Could someone tell me if I need to remove the trans. main shaft to change out the pilot bearing? I'm thinking about changing out the front and rear bearings on the shaft; I've got replace the oil seal anyway. Anyone been into this problem lately? Thanks.

Follow Ups:

• Re: H Trans. Driving Shaft fix? JonM 18:54:30 04/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]